Buy Large Cork Board
Learn how to make a large cork board wall perfect for your home office or as a memory board for your kids art and photos! This easy DIY cork board tutorial uses easy to find supplies and just a few tools.
buy large cork board
My daughter started doing that a few years ago so when it came time to redo her room, giving her a good place to display her art, certificates, and photos was a must and this huge cork board wall is just perfect for that!
I love that it gives her the opportunity to display her things without ruining the walls and have a feeling she'll use this large bulletin board as a display space for years to come. - Always a bonus when your kid's room grows with them ?
Before you begin, you'll need to decide how big you want your bulletin board to be and take measurements, making sure to allow space for your bulletin board frame to go around the edges.
Once you're ready to make cuts, mark the front side of your cork tiles. Using a straight edge (metal is best), run your utility knife down the side of your straight edge repeatedly to score the cork. Each time you run your utility knife down the line, your cut will get deeper.
Grab a cork tile and spray the back side (paper side) with spray adhesive then immediately spray the section of the underlayment it will attach to. Be sure to focus on the corners and edges of your cork tile.
This cork board wall can be completed in an afternoon! You will want a friend to make this project easier. Holding the cork roll up while hammering it in is awkward for one person. Measure how many square feet your wall is (length times width), so you know how much cork you will need!
The tacks that will hold your art and other things to the cork will not go into the drywall. But because I am attaching the cork to the wall using extra long brass tacks, I will end up with holes in the wall when I decide to take the cork board wall down.
Every 1.5-2 feet I stuck in an extra long brass tack to hold the cork into the wall. It went in easily to the cork, and I used my hammer to get it all the way into the drywall. The head of these tacks are smaller than normal tacks, and about the same color as the cork. They blend in perfectly.
When I got to the top of the wall, I had an inch extra leftand I carefully cut this straight to line flush with the ceiling. You will need very sharp scissors to cut the cork straight. I do not recommend using dull scissors or it will not be a straight line!
For electrical outlets, thermostats or any other objects you have to trim around, you will want to turn off the electricity, and then unscrew the cover of the object. Roll the cork over the object and tack it into the wall. Then, taking your scissors, gently cut into the center of the object and slowly around, taking great care not to cut too far out around the object.
Cork material has been known and used for years, but did you know that it's not only a functional bottle stopper or original and eco interior design? It's only the beginning of the story. There are countless types of cork tiles, cork sheets and cork panels for walls that will not only completely change your interior but also serve as a technical material effectively used in manufacturing various products and services.
We started by hanging a thin wood base for the cork tile squares to be adhered to. Not only would this make the squares hang more securely than individually tacking them up, it would solve a slight problem of the existing board: some of the pushpins poke all the way through the cork and into the wall, which would mean a plethora of wall holes over time from window to window if we skipped the backing.
Sherry marked the partial squares with a pen and a ruler and then we just used regular old scissors to cut them. We discovered that making small cuts (rather than using the entire length of the scissor blade) helped keep the cork from cracking, which made for a cleaner edge.
We thought about doing it separately and hanging it afterwards but it would have meant screwing through the cork (which would have flaked out in those areas) or it being mounted in the back on nails, which means it would have stuck out from the wall more (instead of being inset between the molding) so we opted to go with this route so it would look flush to the wall and no have areas where the cork was flaked where the screws went through it.
This bulletin board, made of quality cork, has a full color image of the South Wall which was applied using a digital printing process directly onto the 1 quarter inch "self-healing" cork for a soft, smooth finish. The cork is backed with sturdy 1 quarter inch thick, medium-density fiberboard.
The cork wall could have been cheaper if we were willing to adhere the cork directly to the drywall, but we wanted it to be easily removable in the future so we spent a little extra to build it on plywood.